SMA SB 240-US-10 - Manual (Page 22)

4 User Interface
SMA America, LLC
22 SPortalMGate-US-BA-en-10 User Manual
4.3 Page "My Micro Inverter Plant" > Plant Overview
4.3.1 Plant Data Area
4.3.1.1 Overview
Information Icon Explanation
Current power * The value states the current power of the plant. If the
value cannot be updated due to a temporary connection
problem with your plant, the time at which this value was
retrieved by Sunny Portal will be displayed.
The icon shows how high the current power is compared
to the installed plant power (peak power). The cursor
moves between the yellow area (low current power) and
the red area (high current power).
You can activate the page Energy and Power using the
hyperlink Energy and Power.
Current plant status * The icon displays the current plant status (for explanation
refer to section 4.3.1.2).
You can activate the page Plant Log Book using the
hyperlink Plant Log Book.
Inverter comparison status * The icon will only be displayed if there are at least two
inverters in your Sunny Portal plant. The icon displays the
status of the inverter comparison (for explanation see
section 4.3.1.3).
You can activate the page Plant Monitoring by using
the hyperlink Plant Monitoring.
Energy Today: the value states the energy produced so far by
the plant for the current day.
Total: the value states the total energy produced so far
based on the combined meter readings of the inverters.
Revenue The icon is only displayed if the feed-in tariff has been set
up (see Section 7.8).
Today: the value states the feed-in tariff calculated so far
for the current day.**
Total: the value states the total feed-in tariff calculated
so far.**