SMA Webconnect Systems in SUNNY PORTAL - Manual (Page 10)

3 Getting Started SMA Solar Technology AG
10 SPortalWebcon-BA-en-13 User Manual
Register as a new user in Sunny Portal
1. Activate the checkbox I am not yet registered and select [Next].
2. Enter the necessary data for registration.
3. Select [Next].
☑ You will receive an e-mail containing a hyperlink and your access data to Sunny Portal
within a few minutes.
✖ You did not receive an e-mail from Sunny Portal?
The e-mail may have been automatically redirected to your spam mail folder.
• Check whether the e-mail is in the spam mail folder.
You may have stated a different e-mail address.
• Check whether the e-mail was sent to the other e-mail address.
• If the other e-mail address is an unknown address, restart the PV System Setup Assistant
and register as a new user again.
4. Follow the hyperlink in the confirmation e-mail within 24 hours.
☑ Sunny Portal opens a separate window and confirms successful registration.
• Select [Next].
☑ The page Select PV system opens.
Login as an Existing User in Sunny Portal
In addition to your existing system, another system will be created in Sunny Portal for your
Webconnect system. You can call up the systems via the menu PV System Selection.
Requirement:
☐ You must already be registered in Sunny Portal.
Procedure:
1. Enter the e-mail address and the Sunny Portal password in the fields E-mail Address and
Password.
2. Select [Next].
☑ The page Select PV system opens.
Create a Webconnect system in Sunny Portal
1. Select the option Create a new PV system and enter a PV system name
(e.g. My Webconnect system) in the field PV System Name.
2. Enter the system password for the user role "Installer" of your system in the field PV System
Password. If you have not yet changed the system password for the user role "Installer", the
default system password 1111 is set. In such cases, you must now assign a new system
password.
3. Enter the system password again in the field Repeat password.