SMA Webconnect Systems in SUNNY PORTAL - Manual (Page 26)

5 Page Settings SMA Solar Technology AG
26 SPortalWebcon-BA-en-13 User Manual
5 Page Settings
5.1 Configuring Settings for Diagrams
5.1.1 Setting the Display Period
Depending on the diagram, you can set various display periods. The control element for setting the
display period can be found below each diagram.
Procedure:
• If there is a slider below the diagram, click the blue
arrow and keeping the left mouse button pressed,
set the display time period.
• If there is a date and arrow icon below the diagram, set the date using the arrow icons or a
calendar:
– To set the date using the arrow icons, browse
backward using and browse forward using
and select the desired date.
– To set the date using the calendar, click on the
date between the arrow icons and select the
desired date.
• If there are drop-down lists between the arrow
icons, use these to select the desired display period.
5.1.2 Saving Diagram Data
You can save diagram data as CSV files.
Requirement:
☐ You must have the user role Installer or Administrator (see Section 10.1 "User Roles and
User Rights in Sunny Portal", page 56).
Procedure:
1. If you can see the gearwheel icon on the right below the diagram, move the mouse pointer
onto the gearwheel icon and select in the drop-down menu.
2. If there are two icons on the right below the diagram, select .
3. Select [Save].
4. Select the target directory.
5. Select [Save].