SMA Webconnect Systems in SUNNY PORTAL - Manual (Page 21)

SMA Solar Technology AG 4 User Interface
User Manual SPortalWebcon-BA-en-13 21
Retrieving Messages
1. Select the symbol .
☑ A window appears containing the message and a possible corrective measure.
2. To close the window, select [OK].
4.4 Energy Balance
Requirements for displaying the page:
☐ There must be one Sunny Boy Smart Energy in the Sunny Portal system.
☐ The SMA Energy Meter must be connected to the Sunny Boy Smart Energy.
Showing and hiding data
• You can show and hide the data indicated in the legend of the diagram. To do this, click on the
respective value in the legend which you wish to show or hide.
• If a battery is present in your PV system, you can choose between the simplified view without
battery data and the detailed view with battery data. To do this, you must activate or deactivate
the checkbox Detailed view.
Scaling values in the diagram up to peak system power
• Use the tabs Current and Day to configure scaling of the values up to peak system power.
To do this, move the mouse pointer to the gearwheel icon on the right underneath the diagram
and select in the drop-down menu.
The page Energy Balance includes the following tabs:
Tab Content
Current Data in the diagram Consumption:
• Current consumption: Power that your household is currently
drawing from your PV system (direct consumption), the utility grid
(purchased electricity) and, if applicable, the battery (battery
discharging).
• Purchased electricity: Power that your household is currently
drawing from the utility grid.
• Internal power supply: Power that your household is drawing
directly from your PV system (direct consumption) and the battery
(battery discharging).
• Battery discharging* : Power that your household is currently
drawing from the battery.
• Direct consumption*: Power that your household is currently
drawing from your PV system, without intermediate storage in the
battery.