SMA Webconnect Systems in SUNNY PORTAL - Manual (Page 20)

4 User Interface SMA Solar Technology AG
20 SPortalWebcon-BA-en-13 User Manual
Sunny Portal compiles the system profile from information that you can enter on different Sunny Portal
pages. The following table includes the possible information in the system profile and the source for
changing or entering the information.
4.3.3 Messages for the System Data Area
On the page PV system overview, messages are displayed if Sunny Portal cannot retrieve any
current data from the devices. In this case, the data displayed on the page PV System Overview is
not current.
Messages are displayed on the right above the PV System Data area with the symbol
.
The number in the icon represents the number of messages. The color of the symbol indicates the
message category.
Information Configuration
Location (see Section 7.2 "Changing System Data", page 39)
Operator (see Section 7.6 "Changing Operator Data", page 42)
Commissioning (see Section 7.2 "Changing System Data", page 39)
Nominal system power (see Section 7.4 "Setting the Nominal System Power", page 40)
Annual production
(see Section 7.10 "Automatic Calculation of the Predicted Annual Yield",
page 45)
CO
2
avoided (see Section 7.9 "Entering the Amount of CO2 Avoided", page 44)
Modules (see Section 7.1 "Entering String Properties", page 38)
Azimuth
Tilt angle
Communication
No configuration necessary, this information is automatically detected.
Inverter
Description
(see Section 7.5 "Changing the System Description", page 41)
PV system image (see Section 7.7 "Changing/Deleting the System Image", page 42)
Symbol Meaning
*
* The table gives examples of the symbol with three messages.
red = error
yellow = warning
blue = information