SMA SC 500CP XT Installation - Manual (Page 78)

9.5 Scope of Delivery
Figure 27: Components included in the scope of delivery
Position Quantity Designation
A 1 Inverter
B 1 Ventilation plate
C 5 Kick plate
D 1 Low-voltage HRC fuse handle (optional)
E 1 Non-woven abrasive
F 1 Desiccant bag
G 68 Screw
H 68 Nut
I 136 Fender washer
K 136 Spring washer
L 80 Cable tie
M 3 Cable support sleeve (9.5 mm to 16 mm)
N 1 Circuit diagram, documentation, report
Position of the LV/HRC fuse handle
The LV/HRC fuse handle is located on the inside of the right-hand interface cabinet door.
9.6 Schematic Diagram
Schematic diagrams in PDF format contain jump marks. By double clicking a jump mark, the display will change to the
corresponding current path or the referenced place in the equipment list. Using schematic diagrams in PDF format is
recommended for the installation. The schematic diagrams in PDF format are available on request (see Section 10
"Contact", page 79).
9 Appendix SMA Solar Technology AG
Operating Manual SCCPXT-IA-E4-en-44 78