SMA SC 500CP-US - Manual (Page 48)

7 Transporting the Inverter SMA America, LLC
48 SCCP-US-IA-US_en-41 Installation Manual
5. Pull the front edge of the roof forwards and push upwards at the
same time.
6. Gently push the roof to the rear to slide it out of the guide rails.
8. Remove the grounding strap from the inverter.
9. Remove the inverter roof and store it correctly.
7. /05*$&
Damage to the inverter due to the ripping off of the grounding strap
• Push the roof on the inverter to the left until the grounding strap is visible. Then set the roof down on the inverter.
This prevents the grounding strap from being torn off.