SMA SC 500CP-US User Manual
Page 85
Advertising
SMA America, LLC
13 Installing the DC Fuses
Installation Manual
SCCP-US-IA-US_en-41
85
Procedure:
1. Insert the DC fuses in accordance with the circuit diagram. Use a suitable tool or safety gloves when doing so.
2. Attach the label with the corresponding nominal current of the fuse directly next to the fuse on the copper bus bar.
3. Attach the label with the corresponding nominal current of the fuse to the relevant page of the circuit diagram.
Advertising
This manual is related to the following products: