SMA SC 500HE-20 - Manual (Page 33)

SMA Solar Technology AG 4 Setting Network
Operating Manual SCxxxHE-20-BE-BEN111210 33
4. Select [Properties].
☑ The "Local Area Connection Properties" window opens.
5. Select "Internet protocol (TCP/IP)" and click [Properties].
☑ The "Internet Protocol (TCP/IP) Properties" window opens.
6. Note down the existing network settings so that you can restore the settings in your computer
after starting the Sunny Central.
7. Enter the following values and press [OK].
– IP address: 10.100.100.1
– Subnet mask: 255.0.0.0
8. In the "LAN Connection Properties" window, select [OK]. The settings are now applied.
9. In the "Network Connections" window, select [OK]. This causes the window to close.
☑ The computer is set according to the network settings of the Sunny Central.
Setting the IP address of the Inverter
1. Connect the laptop to the service interface of the Sunny Central using a network cable.
2. Open a web browser such as Windows Explorer.
3. Type 192.168.100.2 in the address bar of the web browser.
☑ The SC-COM interface appears.
4. Enter the installer password in the appropriate field on the homepage and press [Login].
5. Select Sunny Central > Settings > Network.
6. Enter the following values based on the structure of the monitoring network and the regulation
network:
– "IP Address:"
– "Subnet mask"
– "Gateway"
7. Complete the process by pressing [Save] and [Confirm].