SMA SC 500HE-20 - Manual (Page 34)

5 SC-COM Communication SMA Solar Technology AG
34 SCxxxHE-20-BE-BEN111210 Operating Manual
5 SC-COM Communication
5.1 Displaying Spot Values
The SC-COM operating manual contains a detailed description of the SC-COM interface.
1. Access the SC-COM interface.
2. Enter the installer password in the appropriate field on the homepage and press [Login].
3. Select Data > Devices.
4. Select
.
☑ A list of existing device types appears.
5. Select the desired device type.
☑ A list appears containing all existing devices of this type.
6. Select the desired device.
7. Select the "Spot values" tab.
5.2 Changing Parameters
Parameters are changed via the SC-COM. You can access the SC-COM either on site via a laptop
or remotely via a PC.
1. Access the SC-COM interface.
2. Enter the installer password in the appropriate field on the homepage and press [Login].
3. Select Plant > Devices.
4. Select
.
☑ A list of existing device types appears.
5. Select the desired device type.
☑ A list appears containing all existing devices of this type.
6. Select the desired device from the list.
7. Select the "Parameters" tab.
8. Change the desired parameter.
9. Confirm parameter by pressing [Save].