Yaskawa G7 Drive - Manual (Page 18)

Date: 03/31/09, Rev: 09-03 Page 18 of 30 TM.G7SW.064
4.4 Multi-function Digital Output Settings (H2-0X)
Control Mode *1
Setting
Name
Description
V/f
V/f w/ P
G
Open Lo
op
Vector 1, 2 F
lux Vector
40
Follower Position Deviation
Closed: The position regulator error has exceeded the Follower Deviation
Level (P2-06).
Note: ELS modes only.
√ √ √ √
41
In Alignment
Closed: The displacement (Alignment) error and the position regulator error
are within the Alignment Tolerance (P4-02).
Note: ELS modes only.
– – – √
*1: √ = Available, – = Not Available.
4.5 Multi-function Analog Input Settings (H3-0X)
Control Mode *1
Setting
Name
Description
Scaling V/f
V/f w/ P
G
Open Lo
op
Vector 1, 2 F
lux Vector
20
Analog Ratio Adjustment
Input value is added to the digital, MOP and
network communication ratio adjustment to form
the total gear ratio adjustment.
100% = 100.00% √ √ √ √
*1: √ = Available, – = Not Available.