Yaskawa YASNAC PC NC PLC Programming Manual - Manual (Page 109)

6 - 73
YASNAC PCNC PLC Programming Manual Chapter 6: PLC Instructions
(b) Example
(c) Control conditions
• Designation of the size of the conversion data table (IPSHX)
Designate the size of the conversion data table by the number of bytes.
The maximum size is 256 bytes.
• Designation of the conversion standard data table address (APSH#XXXX)
The data in the conversion data table can be read by designating the number in
the table.
Designate this number in the table.
• Designation of the conversion data output address (APSH#XXXX)
Designate the address where the data stored at the number in the table designated
are output.