Yaskawa YASNAC PC NC PLC Programming Manual - Manual (Page 79)

6 - 43
YASNAC PCNC PLC Programming Manual Chapter 6: PLC Instructions
(c) Explanation
• A ST contact must be entered before the DSTW instruction.
• The DSTW instruction is executed in intervals of “4 × n” msec while the ST contact
is ON.
• The relationship between register and numeric value is shown below.
a: “0” or “1”
(d) Example
D15 D14 D13 D12 D11 D10 D9 D8 D7 D6 D5 D4 D3 D2 D1 D0
Register WR1 A A A A A A A A A A A A A A A A
Numeric Value 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1
Register WR1 0 0 0 0 A A A A 0 0 0 0 A A A A