Yaskawa AC Drive-L1000E Safety Precautions - Manual (Page 11)

4 Mechanical Installation
YASKAWA TOEP YAIL1E 02A YASKAWA AC Drive - L1000E Safety Precautions 11
„ Horizontal Suspension of the Drive (CIMR-LE2A0432 and 4A0260)
To make a wire hanger or frame for use when lifting the drive with a crane, lay the drive in a horizontal position and pass
a wire through the holes of the four eye bolts.
When lifting the drive, confirm that the spring washer is fully closed. If not, the drive may become deformed or damaged
when lifted.
Figure 3
Figure 3 Details of Spring Washers
„ Vertical Suspension of the Drive (CIMR-LE2A0432 and 4A0260)
When vertical suspension of the drive is required in an enclosure panel, the orientation of the eye bolts for these drive
models can be easily changed by turning the eye bolts counterclockwise 90 degrees.
Figure 4
Figure 4 Adjusting Angle of Eye Bolts ( CIMR-LE2A0432 and 4A0260 )
‹ Drive Dimensions
A – No space between drive and washer C – Space between drive and washer
B – Spring washer: Fully closed D – Spring washer: Open
NOTICE
Refer to the L1000E Quick Start Guide TOEPYAIL1E01 or Technical Manual SIEPYAIL1E01 for Drive Dimensions.
The L1000E Series CD-ROM No. CD.L1E.01 packaged with the drive contains the L1000E Technical Manual No.
SIEPYAIL1E01 and additional L1000E Series manuals.
B A C D