Yaskawa MP900 Series Machine Controller Programming Panel for Simple Operation - Manual (Page 116)

4.4 Editing Data
4-31
4
4.4.6 Editing Graph Page Data
The following description explains each data item and set values that can be input for graph
pages.
The illustration below is the Time Chart page.
1. Register Number
• Data: The register number for the graph display.
• Set value: Input the register number.
Only bit data can be input.
2. DWG
• Data: The name of the DWG where the register number exists.
• Set value: Input the DWG name.
If the D register is set for the register number, be sure that the D register is
set because the D register is a unique register of the DWG. Any other set
value will be ignored.
3. Initial Button
Click the Initial Button.
The graph displayed will be cleared.
The register number or DWG name will not be cleared.
4. Graph Display
The graph will be displayed based on the register data for the register number and DWG
name.
1. 2. 3. 4.