Yaskawa MP900 Series Machine Controller Programming Panel for Simple Operation - Manual (Page 23)

2.2 MP910 Setup Wizard
2-11
2
1. Check Box for Online
Check the box for online specification.
The following window will be displayed.
a) Logical port No.
Select the logical port number from the drop-down list.
The list will show the CP-217 (serial) port and MP910 port as communications ports
available to the MP910. Any other port will be displayed as an undefined port.
1 Set item c) to the unit number if the CP-217 port is selected.
2 Set item c) to the CPU number if the MP910 port is selected. The CPU number will appear in place of
the Unit number.
b) Network Setting Tab
The tab number specified by the controller number setting in the Setup Wizard 2:
Definitions Window will be displayed.
c) Unit/No. (CPU No.)
If the logical port number is set to CP-217, select the unit number for each Machine
Controller from the drop-down list. If the logical port number is set to MP910, select
the CPU number.
a)
b)
c)
INFO