Yaskawa MP900 Series Machine Controller Programming Panel for Simple Operation - Manual (Page 135)

Module Configuration Definitions
7.2.1 Module Configuration Window
7-6
7
3. Data Set Item
The mode can be changed to data set mode for each Module by clicking on Data set
item. The data set icon of the Module will be displayed in the Data set item portion by
clicking the Module desired on the Module Configuration.
The following icon will be displayed if the MP920 Module is selected, for example.
a) MEMOBUS Port Configuration
To open the Data Set Window for each Module, click the icon in the data set item.
b) Data Show and Data Set Item
To change the Data set item display to Data show display, click Data show.
1 Regardless of whether the Data set item display or Data show display is selected, the Data Set Window
can be opened by double-clicking each Module on the Module Configuration.
2 The lamp on the left side of the Data Set Item Icon is the same in meaning as the lamp on the lower left
side of each Module in standard mode.
3 For the details on the Data Set Window for each Module, refer to the Machine Controller MP900 Pro-
gramming Software User's Manual for standard operation (SIEZ-C887-2.4).
a)
b)
Lamp
Lamps
INFO