Yaskawa MP900 Series Machine Controller Programming Panel for Simple Operation - Manual (Page 34)

Setup Wizard
2.3.3 Network Settings
2-22
2
1. Check Box for Online
Check the box for online specification.
The following window will be displayed.
a) Logical Port No.
Select the logical port number from the drop-down list.
The list will show the CP-217 (serial) port, CP-218 port, CP-215 port, and modem as
communications ports available to the MP920. Any other port will be displayed as an
undefined port.
b) Check Box to Use the Router
Check the box if a router is used.
The above check box will be available only if the CP-217 port or CP-218 port is selected.
c) Network Setting Tab
The tab number specified by the controller number setting in the Setup Wizard 2:
Definition Window will be displayed.
Refer to the detailed settings below.
a)
b)
c)
INFO