Yaskawa MP900 Series Machine Controller Programming Panel for Simple Operation - Manual (Page 119)

5.1 Outline and Operation of Motion Parameter Functions
5-3
5
Opening through the Engineering Manager
Select File (F), Open (O), Definition (D), and then Motion Parameter (P).
The Motion Parameter Window can also be opened by selecting MOTPRM from the Tool-
bar.
„ Parameter Display
The method of parameter display varies with the Machine Controller model as described
below.
MP910
The Motion Parameter Dialog Box will appear as shown below.
Use method 1, 2, or 3 below.
1. Double-click SVB-CH1, or click SVB-CHI and then Open.
The Motion Parameter Window of the SVB-CH1 (Motion Module 01) will be displayed
in the Engineering Manager and the Motion Parameter Dialog Box will close.
2. Double-click SVB-CH2, or click SVB-CH2 and then Open.
The Motion Parameter Window of the SVB-CH2 (Motion Module 02) will be displayed
in the Engineering Manager and the Motion Parameter Dialog Box will close.
3. Click the Close Button.
The Motion Parameter Dialog Box will close. The Motion Parameter Window will not
be displayed.
1. 2.
3.