Yaskawa MP900 Series Machine Controller Programming Panel for Simple Operation - Manual (Page 8)

x
Using This Manual
„
Intended Audience
This manual is intended for the following users.
• Those responsible for designing the MP900-series System
• Those responsible for writing MP900-series motion programs
• Those responsible for writing MP900-series ladder logic programs
„
Description of Technical Terms
In this manual, the following terms are defined as follows:
• PLC: MP900-series Machine Controller
• CP-717: CP-717 Engineering Tool
About the Software
„
Precautions
• This software is to be installed on one and only one computer. You must purchase
another copy of the software to install it on another computer.
• This software is not to be copied for any reason other than when installing it on the com-
puter.
• Store the floppy disks containing the software in a safe place.
• This software is not to be decompiled, disassembled, or reverse engineered.
• This software is not to be given to, rented to, exchanged with, or otherwise released to a
third party without the prior permission of Yaskawa Corporation.
„
Trademarks
• Windows and Windows 95 are registered trademarks of Microsoft Corporation.
• Pentium is a registered trademark of Intel Corporation.
• Ethernet is a registered trademark of Xerox Corporation.