Yaskawa MP900 Series Machine Controller Programming Panel for Simple Operation - Manual (Page 131)

Module Configuration Definitions
7.1.1 Outline of Function of Module Configuration Definitions
7-2
7
7.1 Outline and Starting of Module Configuration Definitions
7.1.1 Outline of Function of Module Configuration Definitions
Module configuration definitions are created with the Setup Wizard.
The Module configuration definitions in simple operation mode make it possible to display
the Module configuration and data settings for each Module.
If the settings are not supported, make the settings in standard mode or use the Setup Wiz-
ard. Module configuration definitions in simple operation mode are available to the MP920
and MP940 only.
7.1.2 Display of Module Configuration Definitions
„ Opening the Window
The Module Configuration Window can be opened with either of the following procedure
after logging onto the Controller folder.
Opening through the File Manager
Double-click Module Configuration under the Definition Folder on the directory tree.
Opening through the Engineering Manager
Click File (F), Open (O), Definition (D), and then Module Configuration (M) on the menu.
To log onto the Controller folder, refer to the Machine Controller MP900 Programming Software
User's Manual for standard operation (SIEZ-C887-2.4). INFO