Yaskawa MP900 Series Machine Controller Programming Panel for Simple Operation - Manual (Page 7)

Overview
ix
Overview
„
About this Manual
This manual describes the operation of the simple version of the CP-717 Engineering Tool, a
programming software package that aids in the design and maintenance of MP900-series
Machine Controllers.
The main information provided in this manual is as follows:
• Functions
• Settings and operation methods
Refer to the standard version of the MP900 Series Programming Software User's Manual
(SIEZ-C887-2.4) for the operation of the whole CP-717.
The simple version applies to the following Machine Controllers.
• MP910，MP920，MP920-02，MP930，MP930-02，and MP940 Machine Controllers
Read this manual carefully to ensure the proper use of the CP-717 Engineering Tool. Also,
keep this manual in a safe place so that it can be referred to whenever necessary.
„
Related Manuals
Refer to the following related manuals as required.
Manual name Manual Number Contents
MP900 Series Machine Controller
User’s Manual:
CP-717 Programming Panel Software
(for standard operation) SIEZ-C887-2.4 Describes the installation and operating
procedures for the CP-717 Program-
ming Panel software used for MP900
Series Machine Controllers.
MP910 Machine Controller
User’s Manual:
Design and Maitenance SIEZ-C887-3.1 Describes the design and maintenance
for the MP910 Machine Controller.
MP920 Machine Controller
User’s Manual:
Design and Maitenance SIEZ-C887-2.1 Describes the design and maintenance
for the MP920 Machine Controller.
MP930 Machine Controller
User’s Manual:
Design and Maitenance SIEZ-C887-1.1 Describes the design and maintenance
for the MP930 Machine Controller.
MP940 Machine Controller
User’s Manual:
Design and Maitenance SIEZ-C887-4.1 Describes the design and maintenance
for the MP940 Machine Controller.
MP900 Series Machine Controller
User’s Manual:
Ladder Programming SIEZ-C887-1.2 Describes the instructions used in
MP900 Series ladder logic program-
ming.
MP900 Series Machine Controller
User’s Manual:
Motion Programming SIEZ-C887-1.3 Describes the motion programming lan-
guage used for MP900 Series Machine
Controllers.