Yaskawa MPLoad Maker - Manual (Page 18)

4 Creating Auto_MPLCD
4.4 Starting Auto_MPL
18
ΠThe transfer will fail in the following cases.
・ The actual IP address is different from the address set when creating the Auto_MPL.
・ The actual serial port (COM port) number is different from the number set when creating the Auto_MPL.
・ The actual CPU number is different from the number set when creating the Auto_MPL.
・ The actual USB address is different from the address set when creating the Auto_MPL.
・ The Target PC is not connected to the transfer destination Machine Controllers.