1 introduction to mpload maker, 1 overview, 2 features – Yaskawa MPLoad Maker User Manual

Page 4

Advertising
background image

1 Introduction to MPLoad Maker

1.1 Overview

4

1 Introduction to MPLoad Maker

1.1 Overview

MPLoad Maker is a tool which allows the user to create an auto start file (Auto_MPL) using the application data for the
MP2000-series Machine Controller created by the Personal Computer (PC). When the created Auto_MPL is written
on the CD-ROM and the CD-ROM (hereinafter referred to as MPLCD) is inserted into the CD-ROM drive of the PC
connected to a Machine Controller (hereinafter referred to as target PC), AUTO_MPL will open the application
automatically and transfer the application to the target Machine Controller.
Instead of using Auto_MPL written on the CD-ROM, you can use the .BAT file writen on other media or on the HDD.
The application is transferred as illustrated below.

ΠMPLoad Maker can not be used to reuse rewritable disks. A CD-RW device or driver is required to write the

Auto_MPL onto a CD-ROM.

1.2 Features

MPLoad Maker features the following:

• Application transfer without installing a tool such as MPE720 or MPLoader in the Target PC.
• Application transfer to multiple Machine Controllers using a single Auto_MPLCD.
• As the functions of Auto_MPL are limited to opening and transfering the application, the application will not

be overwritten adversely in the Target PC.

MP2300

YASKAWA

RDY

ALM

TX

RUN

ERR

BAT

BATTERY

SW1

OFF

ޓޓޓ

ON

M-

I/II

CPU

ޓI/O

POWER

DC24V

DC 0V

STOP

SUP
INIT

CNFG

MON
TEST

218IF-01

ERR

COL

RX

RUN

STRX

TX

INIT

TEST

ON

OFF

PORT

10Base-T

LIO-04

FU

RUN

CN1

CN2

SVB-01

TX

ERR

RUN

SPD

SIZE

M/S

ON

OFF

˜10

˜1

M-I/II

CN1

CN2

MP2000-series Machine Controllers

Target PC

Auto_MPLCD

PC with MPLoad Maker

Write the Auto-MPL
onto a CD-ROM.

Insert the Auto_MPLCD
into the CD-ROM drive.

Write onto a general-purpose
flash memory card (USB).

Copy

MPLoad Maker

RS-232C communications,
Ethernet communications, or
USB commnications

Create the Auto-MPL (auto start file)
using the application for MP2000-series
Machine Controller.

Auto-MPL automatically
starts to transfer the
application.

MP2200 MBU-01

POWER

SVB-01

SVB-01 218F-01

LIO-02

LIO-01

LIO-01

217F-01 EXIOIF

260F-01

Y

ASKA

W

A

Advertising