Yaskawa MPLoad Maker - Manual (Page 8)

4 Creating Auto_MPLCD
4.1 Communications Settings for Target PC
8
4 Creating Auto_MPLCD
This chapter explains how to create the Auto_MPL file using MPLoad Maker and write it onto a CD-ROM to create
the Auto_MPLCD.
4.1 Communications Settings for Target PC
Start MPLoad Maker to make the communications settings for the Target PC. A serial communications interface, 218
communications module (Ethernet), MP2100 interface, or USB can be used for communications between the Target
PC and the Machine Controllers.
ΠCheck the following before setting: Target PC IP address, serial port (COM port) number used for communications
between Target PC and Machine Controllers, and CP number where the MP2100 Module is mounted when using a
MP2100 Module.
1. Click the Start Button and select Programs - YE_Applications - MPLoad Maker to start MPLoad
Maker.
2. Click the Configuration Button.
The Communication Setting Dialog Box will be displayed.
ΠRefer to 4.2 Creating Auto_MPL on page 11 for details on Work folder specification.