Yaskawa MPLoad Maker - Manual (Page 5)

1 Introduction to MPLoad Maker
1.3 Specifications
5
1.3 Specifications
The following table provides the specifications of MPLoad Maker.
* 1. The relay setting is not supported.
* 2. Depends on the size of application to be transferred.
Item PC with MPLoad Maker Target PC
Applicable Machine Controllers MP2100, MP2100M, MP2200 (with CPU-01/02), and MP2300
CPU Pentium II 400 MHz min.
Minimum Required RAM 128 MB
Minimum Required Display
Resolution
800 × 600
Supported Operating Systems
・ Windows 98SE
(Japanese or English version)
・ Windows 2000
(Japanese or English version)
・ Windows XP
(Japanese or English version)
・ Windows 2000
(Japanese or English version)
・ Windows XP
(Japanese or English version)
Supported Communications
Interfaces or Modules
−
Serial communications interface
217IF-01 *1
218IF-01 *1
260IF-01
261IF-01
215AIF-01
Ethernet communications interface
218IF-01 *1
USB interface
MP2200 (with CPU-02 Module)
MP2100 interface
MP2100
MP2100M
Transferable File Types
.MAL file (compressed MAL file of MPE720 Ver.5 application)
.YMW file (MPE720 Ver. 6 project file)
Application Continuous Transfer
Function
−
Provided
Memory Required for Installation 30 MB None (Installation is not necessary.)
Hard Drive Space Required for
Create/Transfer
25 MB +
α *2
(per Auto_MPL)
1 MB +
α *2 (Data will be deleted automat-
ically at completion of transfer.)