Epson AcuLaser CX37DNF - Manual (Page 112)

Admin Password
Item Description
Current Password Type in the current password.
Range: Up to 16 bytes
New Password Sets a new password to enter Administrator Mode.
Range: Up to 16 bytes
Note:
Passwords can be set to any string of numbers and letters (uppercase and
lowercase) up to 16 characters in length.
Retype New Password Verifies the new password typed in the New Password text box.
Range: Up to 16 bytes
Note:
If the password typed in three text boxes doesn’t match, the following message
displays when you choose the Apply button: “Password was changed
unsuccessfully. Please retry.” Click OK button, and then retype the passwords in
both text boxes.
Apply button Applies the configuration settings for this window.
Clear button Resets all configuration settings to previous values.
Note:
If you forget the new password you’ve assigned, contact Technical Support.
Save Settings
From the System - Save Settings window, the machine settings can be saved as a file on the computer
being used. In addition, the saved settings file can be read by the machine.
Note:
The following settings are not saved in the file:
❏ Phone books
Item Description
Save Settings Device Setting Click Save button to save the machine settings as a file.
Epson AcuLaser CX37 Series Reference Guide
Using Web-Based EpsonNet Config 112