Epson AcuLaser CX37DNF - Manual (Page 116)

Notification Settings
Status Notification Settings
Item Description
IP Address Notification Address Specify the IP address of the SNMP trap receiver. An IPv4 or IPv6
address or a host name can be specified.
Range: Up to 63 bytes
Default: 0.0.0.0
Port Number Specify the port number of the SNMP trap.
Range: 1 - 65535
Default: 162
Community Name Specify the community name for the SNMP trap.
Range: 1 to 15 bytes
Default: public
IPX Address Notification Address Specify the IPX address of the SNMP trap receiver.
Range: 8 bytes
Default: 00000000
Node Address Specify the node address of the SNMP trap receiver.
Range: 12 bytes
Default: 000000000000
Community Name Specify the community name for the SNMP trap.
Range: 1 to 15 bytes
Default: public
Email Address Email Notice Specifies whether or not a notification is sent by e-mail when a
warning occurs in the printer.
Choices: Enable, Disable
Default: Enable
Notification Address Specifies the e-mail address where the notification is sent.
Range: Up to 320 bytes
Epson AcuLaser CX37 Series Reference Guide
Using Web-Based EpsonNet Config 116