Epson AcuLaser CX37DNF - Manual (Page 141)

LDAP Search
Item Description
LDAP Search Specify the method for searching for the destination.
Choices: Name, E-mail
Default: Name
LDAP Search String Specify the LDAP search string.
Range: Up to 20 characters
Apply button Starts the LDAP searching.
Clear button Resets all configuration settings for this window to their user defaults.
Note:
When an LDAP server is used, the correct search results may not be retrieved when the search is
performed from a server using anonymous access.
Speed Dial Registration (Scan to Server)
On the Scan - Speed Dial Setting - Speed Dial Registration page, select the server type of speed dial
destination to be added.
Item Description
Speed Dial Registration From the drop-down list, select the type of speed dial destination to be added.
If FTP is selected, refer to “For FTP Server” on page 141.
If SMB is selected, refer to “For SMB server” on page 144.
Choices: FTP, SMB
Default: FTP
Apply button Displays the page for the type of speed dial destination selected from the list.
Clear button Resets all configuration settings for this window to their user defaults.
For FTP Server
Note:
The Network - FTP - Client screen, set to Enable from Send when sending to FTP server. Also, when
sending via proxy server, specify the proxy server setting. For details, refer to “Client” on page 173.
Epson AcuLaser CX37 Series Reference Guide
Using Web-Based EpsonNet Config 141