Epson AcuLaser CX37DNF - Manual (Page 93)

Print Page
This page allows you to check the settings for printing when there is no PDL printer driver.
Default Settings
General Settings
Item Description
PDL Indicates default language to be selected.
Paper Source The paper tray that is normally used is indicated.
Duplex If Long-Edge Binding is indicated, the pages will be printed on both sides of the
paper for long-edge binding.
If Short-Edge Binding is indicated, the pages will be printed on both sides of the
paper for short-edge binding.
Output Tray Displays the name of the output tray.
Copies Indicates the default setting for number of copies to be printed.
Paper Size Indicates the default setting for the size of paper.
Width Indicates the paper width when Paper Size is set to Custom Size.
Length Indicates the paper length when Paper Size is set to Custom Size.
Paper Type Indicates the default setting for the type of paper.
Collate If On is indicated, all pages in a copy of the document can be printed before
printing the next copy.
If Off is indicated, all copies of the document are not printed separately.
Note:
This menu item appears only if an optional hard disk drive is installed.
Epson AcuLaser CX37 Series Reference Guide
Using Web-Based EpsonNet Config 93