Epson AcuLaser CX37DNF - Manual (Page 188)

Authentication
User Authentication
Note:
❏ This page appears only if an optional hard disk drive is installed.
❏ When User Authentication is set to On and Public Access is set to Restrict on this page, printing is
not possible except from a host where authentication settings can be specified (Windows printer
driver). In addition, resources (fonts, color profiles and form overlays) can no longer be downloaded
and firmware can no longer be updated.
Item Description
User Authentication Select whether or not user authentication is performed.
Choices: On, Off
Default: Off
Public Access Select whether or not logon as a Public user is permitted when authentication
settings have been specified.
Choices: Allow, Restrict
Default: Allow
Apply button Applies the configuration settings for this window.
Clear button Resets all configuration settings to previous values.
Auto Logout
Item Description
Admin Mode Logout Time Specify the length of time to automatically log off from Administrator mode.
Range: 1 - 60 (Minutes)
Default: 10
User Mode Logout Time Specify the length of time to automatically log off from User Mode.
Range: 1 - 60 (Minutes)
Default: 60
Apply button Applies the configuration settings for this window.
Clear button Resets all configuration settings to previous values.
Epson AcuLaser CX37 Series Reference Guide
Using Web-Based EpsonNet Config 188