Epson AcuLaser CX37DNF - Manual (Page 85)

Administrator Mode
In order to change any configuration settings through Web-Based EpsonNet Config, you must first
enter Administrator Mode.
1. Select Administrator.
2. Click the Log in button.
3. Type the password in the Admin Password text box.
Note:
Default password is set to “administrator”; however, once you have logged on in Administrator
Mode, the password can be specified in the System - Admin Password window.
4. Click OK button.
Viewing Printer Status
System Page
On this page you find printer status and current configuration settings, printer identification, and
links to all other web pages.
Note:
All of the information displayed on the System page is read only.
Device Information
Summary
Item Description
Copier RAM Displays the amount of copier memory installed in the printer.
Printer RAM Displays the amount of printer memory installed in the printer.
HDD If an optional hard disk drive is installed in the printer, displays the size of the hard
disk.
Memory Card This item is not supported by this printer.
Epson AcuLaser CX37 Series Reference Guide
Using Web-Based EpsonNet Config 85