Epson AcuLaser CX37DNF - Manual (Page 69)

5. Open the Network window.
❏ In Windows Vista/Server 2008, click Start and Network.
❏ In Windows 7/Server 2008 R2, open Computer and click Network. If Network is not
displayed in Computer, click the Network and Internet category on the Control Panel, and
also click View network computers and devices.
6. Select the device name of this machine, and then click Install on the toolbar.
7. Click Locate and install driver software (recommended).
8. If Windows Vista is being used, go to step 9.
If Windows Server 2008 is being used, click Don't search online.
9. Click Browse my computer for driver software (advanced).
10. Click Browse.
11. Locate the directory on the Software Disc where the printer driver files are located and then click
OK .
12. Click Next.
13. Click Close.
Adding a printer using Add Printer Wizard
In Windows Vista/Server 2008, you can add a Web service device using the addition function of the
printer after connecting this machine.
Note:
❏ In Windows 7/Server 2008 R2, a window for specifying an installation disk does not appear after the
machine is connected to the computer. To connect this machine as described in “Making the printer
driver known from the Network window” on page 67.
❏ Installing the driver to Windows Vista/Server 2008-based computers requires the administrator
authority.
1. To use Web Service print, check that Network discovery is enabled in Network and Sharing
Center on the computer.
Epson AcuLaser CX37 Series Reference Guide
Network Printing 69