Chapter 4: programming the access control module – RISCO Group ProSYS 128 User Manual
Page 16
16
Access Control User's Manual
Chapter 4: Programming the Access
Control Module
This chapter provides detailed instructions for programming the
functions of the Access Control module, as well as describes the
related quick key combinations.
NOTE:
The programming instructions described in this chapter are based on the same
concepts as those described in the ProSYS User's Manual.
This chapter includes the following sections:
6
6
8
8 CODE
CODE #
#
Accessing the Access Control Menu, page 17
6
6
8
8 CODE
CODE #
#
1
1
Configuring Door and Reader Settings, page
17
6
6
8
8 CODE
CODE #
#
2
2
Configuring Time Schedules, page 20
6
6
8
8 CODE
CODE #
#
3
3
Configuring Access Groups, page 24
6
6
8
8 CODE
CODE #
#
4
4
Adding Users to the System, page 25
6
6
8
8 CODE
CODE #
#
5
5
Configuring User Settings, page 33
6
6
8
8 CODE
CODE #
#
6
6
Opening Doors, page 36
Some of the Access Control programming options have been
pre-programmed by the Installer (refer to the ProSYS Installation
and Programming Manual). In addition, a detailed description of
how to use the keypad is provided in the ProSYS User's Manual.
IMPORTANT:
Ensure that your security system is disarmed before you program any of the
Access Control functions and also that all the Access Control modules are
connected to the Main Panel.