RISCO Group ProSYS 128 - Manual (Page 24)

24 Access Control User's Manual
Configuring Access Groups
6 6 8 8 CODE CODE # # 3 3
After defining the door mode, reader type, and the time
schedules, you can configure access groups. Each access group
represents the doors that groups of users can access during
specific time periods.
You can configure up to 16 access groups in the system, which
consists of assigning a logical name to the access group and
then assigning up to 16 doors, each with its own weekly program,
to the access group. Afterwards, you will assign each individual
user to the appropriate access group, as described in Assigning
Users to Access Groups, page 34.
For example, you can configure an access group named Markt
Personnel that represents a group of users that have access to
doors 1, 7 and 8, according to the weekly program named Markt
Weekly that you defined earlier. Then you can configure another
access group named Cleaning Personnel that represents a
group of users that only has access to doors 7 and 8 and only
during the time periods defined in the weekly program named
Cleaning Night (i.e., Mon-Fri, 17:00 to 19:00).
NOTE:
Changes that you make to access group definitions directly affect the users
assigned to the groups.
When performing this procedure, use the data that you
prepared in Table 5: Access Groups, page 42.
¾
To configure an access group:
1)
ACCESS CONTROL:
1) SETTINGS
ACCESS CONTROL:
1) SETTINGS
From the Access Control menu,
select
[3] Group Access.
2)
SELECT GROUP:
01) GROUP 01
SELECT GROUP:
01) GROUP 01
Enter a group number (1-16).
3)
GROUP 1
1) DOOR 01
GROUP 1
1) DOOR 01
Select a door number for the
selected group and press
.
4)
WEEKLY PROGRAM:
01) WEEKLY 1
WEEKLY PROGRAM:
01) WEEKLY 1
Select a weekly program (1-25) for
the selected door and press
.