RISCO Group ProSYS 128 - Manual (Page 17)

Access Control User's Manual 17
Accessing the Access Control Menu
6 6 8 8 CODE CODE # #
All functions in this manual are performed from the Access
Control menu.
¾
To access the Access CControl menu:
1) From the initial keypad display, enter the [ ] User Functions
mode and select [8] Access Control.
The following option is displayed:
INSERT CODE:
_ _ _ _
2) Enter the current Master Code or the Manager Code and
press .
The first option of the Access Control menu is displayed, as
shown in the next section. You can now program the
required Access Control options, as described in the
subsequent sections of this manual.
Configuring Door and Reader Settings
6 6 8 8 CODE CODE # # 1 1
Configuring the Access Control settings consists of defining the
door mode for each door and the reader type for each reader
in the system, as described in the following sections:
x Defining the Door Mode, below
x Defining the Reader Type, page 19
Defining the Door Mode 6 6 8 8 CODE CODE # # 1 1 1 1
The door mode option enables you to determine the status of
the electric strike on each door. For example, during a weekend
period, you may want a specific door to be closed at all times to
prevent people from entering the premises.
When performing this procedure, use the data that you
prepared in Table 1: Doors, page 38.