RISCO Group ProSYS 128 - Manual (Page 31)

Access Control User's Manual 31
¾
To enter card codes for a group of enter/exit users one by one:
1)
ACCESS CONTROL:
1) SETTINGS
ACCESS CONTROL:
1) SETTINGS
From the Access Control menu,
select
[4] Record Users.
2)
RECORD USERS
1) ARM CARDS
Select [2] Entrance Card.
3)
EN. CARDS 100-999
1) BY CARD CODE
Select [1] By Card Code.
4)
CODE ALLOCATION
1) BY GROUP
Select [2] One by One.
5)
SELECT USER:
100 100-999
SELECT USER:
100 100-999
Enter a user number between 100-
999 and press
. The first
available user number is displayed
as the default.
6)
U:100 CARD CODE
........
U:100 CARD CODE
........
Enter the 8-digit card code of the
access card that you want to assign
to the first user and press
.
7)
U: 100 INSERTION
CONFIRMED
This message indicates that the first
enter/exit user has been added to
the system successfully, and then the
Select User option is redisplayed.
8) Repeat steps 5 to 7 to add the remaining enter/exit
users in the group, as required.
By Passing a Card in a Reader 6 6
8 8 CODE CODE # # 4 4 2 2 2 2
You can add enter/exit users by passing each user's card in a
reader without returning to the keypad. This option is used in the
following circumstances:
x When you have access cards without numbers printed on
them.
x When the cards have less than eight digits printed on them.
x When you have a batch of cards without sequential
numbering.