TA Triumph-Adler 261ci - Manual (Page 180)

9-20
Fax Settings > Transmission Restriction
Setting Reception Restriction
Restrict incoming faxes so that you only receive originals from senders registered in Permit FAX No. and Permit ID No.
and senders registered in your Address Book. This mode also allows you to set a [Reject List] for Reception Restriction
so that reception from senders on the list of Rejected FAX numbers or from senders whose Local FAX Number is not
registered are rejected. (You can select whether reception from a party whose local fax number is not registered is
allowed or rejected in Unknown Number Reception on page 9-21.) To change the reception restriction, follow the steps
below.
1
Display the screen.
2
Configure the function.
To not use the reception restriction, press [Off]. To restrict the other parties from which you
receive originals only to the ones registered in Permit FAX No. and Permit ID No. as well as
the ones registered in the Address Book, press [Permit List + Address Book]. To block
incoming faxes from senders registered in Reject FAX No., press [Reject List].
System Menu/Counter.
System Menu
Send
10:10
Document Box
FAX
Favorites/Application
3/5
TX/RX Common
10:10 System Menu/Counter.
Transmission
< Back
1/2
Reception
TX/RX Restriction
FAX
1
2
3
Use [ ] or [ ] to scroll up and down.
G
B
0054_02
G
B
0316_00
TX/RX Restriction - RX Restriction
10:10 System Menu/Counter.
Permit List + Addr Book
Reject List
Off
Cancel
1/1
OK
TX Restriction
10:10 System Menu/Counter.
RX Restriction
< Back
1/2
Off
Off
Permit No. List
Permit ID List
FAX - TX/RX Restriction
1
2
G
B
0345
_00
G
B
0347
_00