TA Triumph-Adler 261ci - Manual (Page 84)

5-9
Receiving Faxes > Fax reception settings
3
Selecting the paper type.
4
Set the paper type.
Configure paper settings for fax reception. When selecting the paper type, select the same paper type as
you selected in step 3.
For more information about configuring settings, refer to Default fax settings on page 9-2.
Reception Date/Time
Reception Date/Time function adds the reception date/time, sender information and number of pages on the top of each
page when the message is printed out. It is useful for confirming the time of reception if the fax is from a different time
zone.
For more information about configuring settings, refer to Default fax settings on page 9-2.
Duplex Print Output
When received multiple pages of data are the same width, they can be printed out on both sides of paper having the
same width as the data.
For more information about configuring settings, refer to Default fax settings on page 9-2.
2 in 1 Print
When you receive a multi-page Statement or A5 size original, this function prints 2 pages of the original at a time on one
Letter or A4 size sheet of paper.
For more information about configuring settings, refer to Default fax settings on page 9-2.
NOTE
When the received data is printed on multiple pages, the reception date/time is printed on
the fist page only. It is not printed on the pages that follow. When the received fax data is
forwarded after retrieving it from memory, the reception date/time is not added to the
forwarded data.
On Print the reception date/time.
Off Do not print the reception date/time.
On Print on both sides.
Off Do not print on both sides.
On Print 2 in 1.
Off Do not print 2 in 1.
10:10 System Menu/Counter.
Rough
Recycled
Preprinted
Plain
Cancel
1/5
OK
Cassette 1 - Media Type
Paper Size
10:10 System Menu/Counter.
Media Type
< Back
1/1
Plain
Cassette/MP Tray Settings - Cassette 1
A4
1 2
G
B
0137_00
G
B
0221_00
Use [ ] or [ ] to scroll up and down.