TA Triumph-Adler 261ci - Manual (Page 43)

3-3
Methods For Entering the Destination > Entering the destination fax number with the numeric keys
4
Press [OK].
Entry of the destination finishes.
Key Description
Sub Address To communicate using the sub address, press this key. For
details, refer to Sub Address Transmission on page 6-23.
Detail Settings TX Start Speed To change the transmission start speed, press this key. Select
the speed from 33,600 bps, 14,400 bps, and 9,600 bps.
ECM ECM (error correction mode) is a function to automatically
resend an image that has not been correctly sent or received
due to the effects of noise on the telephone line during
transmission.
Encrypted
Transmission To send faxes using encryption, press this key. For details,
refer to Encryption on page 6-36.
NOTE
Press [On Hook] to connect to the telephone line.
When the FAX number has been entered, the machine starts dialing to the receiving
system.
After pressing this key, you can dial the number of the receiving system using the numeric
keys. For details, refer to
Manual Send on page 4-14 .
NOTE
When On is selected in Entry Check for New Dest., a confirmation screen is displayed for
the entered FAX number. Re-enter the same FAX number and press [OK]. For details, refer
to Entry Check for New Dest. in the Operation Guide for the machine.
Press [Next Dest.] to enter the next fax number. For details, refer to Broadcast Transmission
on page 3-8 .
In addition to a fax, you can include e-mail transmission and folder (SMB/FTP) transmission
to send as one job. For details, refer to the machine’s Operation Guide.
FAX
10:10
On Hook
Cancel
Sub Address
Pause Space Backspace
Detail Settings
OK Menu Next Dest.
1234567890
Ready to send.
G
B
0703_00