TA Triumph-Adler 261ci - Manual (Page 97)

6-12
Using Convenient Fax Functions > Memory Forwarding
Settings for Forwarding from Embedded Web Server RX
(Forward Settings)
You can use Embedded Web Server RX on a computer connected to the network to specify the forwarding settings on
this machine.
Refer to the machine’s Operation Guide for information on the network settings.
Accessing Embedded Web Server RX
1
Display Embedded Web Server RX
1 Open the web browser.
2 In the Address or Location bar, enter the machine’s IP address as the URL, e.g.
192.168.48.21/.
The web page displays basic information about the machine and Embedded Web Server
RX as well as the current status of the machine.
2
Select settings in Embedded Web Server RX.
Select a category from the navigation bar on the left to view and set values for that particular
category.
If administrator privileges have been enabled on Embedded Web Server RX, remember to
enter the correct user name and password when trying to access the relevant screens.
For details, refer to the Embedded Web Server RX User Guide.
NOTE
To fully access the features of the Embedded Web Server RX pages, enter the User Name and Password and click
[
Login ]. Entering the predefined administrator password allows the user to access all pages, including Document Box,
Address Book, and Settings on the navigation menu. The factory default setting for the default user with administrator
privileges is shown below.
* Upper case and lower case letters are distinguished (case sensitive).
NOTE
If the screen There is a problem with this website's security certificate. is displayed,
configure the certificate. For details on Certificates, refer to the Embedded Web Server RX
User Guide.
You can also continue the operation without configuring the certificate.
Login User Name Admin
Login Password Admin