TA Triumph-Adler DC 2162 - Manual (Page 140)

System Settings
3-40
Registering Non-standard Sizes for Originals
You can register up to four non-standard sizes for the original documents of non-standard size.
These non-standard sizes are displayed on the touch panel as the options for paper sizes.
1 Press the System Menu/Counter key.
2 Press [Register Orig. Size]
3 Select one of the four custom sizes
available (1 to 4). Press [Change #].
4 Press [On] to start entering the
non-standard size.
5 Press [+] or [-] to specify the vertical size
(Y) as the height.
6 Press [+] or [-] to specify the horizontal
size (X) as the width.
System Menu / Counter
Job
System Menu
Management
Hard Disk
Report
Print
Language
MP tray
Orig. Size
Register
Management
Document
Default
Machine
Default
Copy
Setting
Accounting
System Menu
Register Orig. Size
Default menu
Original size (custom 1)
Original size (custom 2)
Original size (custom 3)
Change #
Original size (custom 4)
System Menu / Counter
Setting mode
2x2 "
2x2 "
2x2 "
2x2 "
Original size (custom 1) Back
Register Orig. Size System Menu
Register custom size original.
On
Off
-
Original size (custom 1) Back
Off
On
Register Orig. Size System Menu
X Y
Register custom size original.
(50 297)
mm 50
( 50 432)
mm 50
-
Original size (custom 1) Back
Off
On
Register Orig. Size System Menu
X Y
Register custom size original.
(50 297)
mm 50
( 50 432)
mm 50
-