TA Triumph-Adler DC 2162 - Manual (Page 77)

Copying Functions
1-71
Original Orientation
Specify the original orientation as follows.
1 On the [Basic] screen, press [Original
Orient.].
2 Based on the original orientation, press
[Top Edge Top] or [Top Edge Left].
NOTE: Failure to place originals
correctly may result in copying errors.
3 Press [Close].
Density Level
Specify the copy density level as follows.
1 Press [Quality]. On the next screen,
press [Density].
2 For automatic density adjustment, press
[Auto]. To adjust the density manually,
press [Manual]. Next, press [Lighter] or
[Darker] to adjust the density.
3 Press [Close].
Ready to Job build.
Job Build
A4
Paper
1-sided
Basic Quality
Zoom
Top Edge Top
Original
Finishing
2-sided Copy
Edit
1-sided Copy-Left
Finished page #:
Step
Auto %
Original
Set original. Press Start key.
Orient.
1-sided/
2-sided Selection Type
al. Press Start key.
Set
Back
Top Edge
Select Original
Orientation.
Top Edge
Close tation
to Job build.
Check Original Orientation. can
be shown at right side of display .
Follow the steps. If setting mode is
wrong, incorrect copy will result.
Left Top
Ready to Job build.
Job Build
Density 4
Density
Text + Photo
Basic Quality
Off
Edit
1-sided Copy-Left
Finished page #:
Step
Original
Set original. Press Start key.
EcoPrint
Image
Set original. Press Start key.
Back Density
Ready to Job build.
Auto
Manual Lighter Darker