TA Triumph-Adler DC 2162 - Manual (Page 78)

Copying Functions
1-72
Original Quality
Specify the Image Quality mode to match the type of original as follows.
1 Press [Quality]. On the next screen,
press [Original Image].
2 Select the Image Quality mode from
[Text+Photo], [Photo] and [Text].
3 Press [Close].
EcoPrint
To economize toner, specify EcoPrint as follows.
1 Press [Quality]. On the next screen,
press [EcoPrint].
NOTE: The setting for EcoPrint applies
to all other steps. Simply complete this
setting once as an initial step.
2 Press [On] to activate EcoPrint.
3 Press [Close].
Ready to Job build.
Job Build
Density 4
Density
Text + Photo
Basic Quality
Off
Edit
1-sided Copy-Left
Finished page #:
Step
Original
Set original. Press Start key.
EcoPrint
Image
Ready to Job build.
Original Image
Text+Photo
Photo
Back
Set original. Press Start key.
Text+Photo:Set this mode to
original mixed (text & ph
Photo:Add a dimensional effe
Text :Copy pencil & fine line c
Text
Ready to Job build.
Job Build
Density 4
Density
Text + Photo
Basic Quality
Off
Edit
1-sided Copy-Left
Finished page #:
Step
Original
Set original. Press Start key.
EcoPrint
Image
to Job build.
EcoPrint
al. Press Start key.
EcoPrint enables toner consumption
Back
On
Close
Set
reduction.
Off
Conserve toner
consumption.
Image resolution reduced. !