TA Triumph-Adler DC 2162 - Manual (Page 47)

Copying Functions
1-41
Proof Mode
Delivers a single copy of a high-volume copy job to check before approving the job. If there are any
problems with the copy, simply cancel the job to avoid wasting paper.
Follow the steps as below to check a single copy in a job.
1 Press [Function] and then [T Down].
2 Press [Proof Copy] ([Test Copy]).
3 Press [On].
4 Place the originals in the document processor or on the platen. Press the Start key to deliver a test
copy.
5 After delivering the test copy, the
confirmation screen will be displayed.
The copier will remain in standby mode
until the job is approved or cancelled.
Check the test copy.
If it is acceptable, press the Start key to
deliver the specified quantity.
To change the copy quantity, press
[Change Preset].
If there is a problem with the copy, press [Cancel] to redo the copy settings.
Ready to copy.
A
Paper Size
Program Function User choice Basic
Up
Staple
/Punch
Auto Image
Copy
OHP Back
Original
Orient.
Proof Copy
Mirror
Memo
Pages
Down
EcoPrint
Output
Negative
Multi-page
100%
Rotation
Repeat
Tray
Image Image
Form
Back Proof Copy
Ready to copy.
Off
On
Paper Size
A
If On is selected, copying stops
one set is ejected.
Finishing result can then be che
100%
Register
Output Tray
ue to print, press Start key.
APS
A4 Plain
Count/Set
1-sided
Collate
Left tray
Cancel
d retry, press [Cancel].
of copy.
Change
Preset