TA Triumph-Adler DC 2162 - Manual (Page 73)

Copying Functions
1-67
23 All originals have been scanned. Press [Scanning finished] to start the job.
24 If there are no problems with the accomplished copies, you can use Repeat Copy to produce
additional copies in the desired quantity as needed. Refer to Repeat Copy on page 1-42 for details.
You are now completed programming a copy job with job build.
Specifying Copy Functions
Paper Selection
Select the paper size as follows.
1 On the [Basic] screen, press [Paper
Selection].
2 Select the MP tray or a cassette and
press [Close].
Types of Originals
Select originals that are one-sided or two-sided, have facing pages like books or magazines, or are
like multi-page business forms.
1 On the [Basic] screen, press [Original
Type].
2 Based on the originals to be placed,
select [1 sided] ([1-sided]), [2 sided]
([2-sided]), [Book], or [Multi-Page Form]
([Multi-Page Forme]).
NOTE: When selecting [2 sided]
([2-sided]), check the binding direction
and be sure that the originals are
placed in the correct orientation.
When selecting [Book], be sure that the
binding direction is correct.
Ready to Job build.
Job Build
A4
Paper
1-sided
Basic Quality
Zoom
Top Edge Top
Original
Finishing
2-sided Copy
Edit
1-sided Copy-Left
Finished page #:
Step
Auto %
Original
Set original. Press Start key.
Orient.
1-sided/
2-sided Selection Type
Ready to Job build.
Back Paper Selection
Set original. Press Start key.
Plain
A4
Recycled
A4
Plain
A3
Plain
A4
Colour
MP tray
Ready to Job build.
Job Build
A4
Paper
1-sided
Basic Quality
Zoom
Top Edge Top
Original
Finishing
2-sided Copy
Edit
1-sided Copy-Left
Finished page #:
Step
Auto %
Original
Set original. Press Start key.
Orient.
1-sided/
2-sided Selection Type
Book
Set original. Press Start key.
Back
1-sided
Ready to Job build.
2-sided
Original Type
Multi-page
Form