PLANET VC-2400MR48 - Manual (Page 167)

User’s Manual of VC-820M / VC-2400MR Series
167
„ Unicast/Multicast : Flood unicast/multicast filter
„ Control Packets : Control packets filter
„ IP multicast : IP multicast packets filter
„ Broadcast Packets : Broadcast Packets filter
Syntax:
broadcast select <unicast/multicast | control packet | ip-multicast | broadcast>
Collision-Retry
Description:
Collision-Retry setting
Syntax:
Collision-Retry <off | 16 | 32 | 48>
Parameters:
<16 | 32 | 48> – In Half-Duplex, collision-retry maximum is 16 (or 32, 48) times and packet will be dropped if collisions still
happen
off – In Half-Duplex, if happen collision will retry forever (Default).
6.7 Administration Configuration
6.7.1 Change Username / Password
hostname
Description:
Set switch name.
Syntax:
hostname <name-str>
Parameters:
<name-str> specifies the switch name. If you would like to have spaces within the name, use quotes (“”) around the
name.
no hostname
Reset the switch name to factory default setting.
[no] password
Description:
Set or remove username and password for manager or operator.
Syntax:
[no] password <manager | operator | all>