PLANET VC-2400MR48 - Manual (Page 70)

User’s Manual of VC-820M / VC-2400MR Series
4.3.5 Protect Port
There are two protected port groups; ports in different groups can't communicate.
In the same group, protected ports can't communicate with each other, but can communicate with unprotected ports.
Unprotected ports can communicate with any ports, including protected ports.
Figure 4-3-6: Protected Port Setting Web interface
The page includes the following fields:
Object Description
Port ID Identify the Managed Switch interface.
Protected
Enable the Protected function on the selected port.
If the check box is not shown as , then this port a unprotected port and it can
communicate with any ports - including protected ports
Group 1
Set the protected port to be Group 1 member.
Group 2
Set the protected port to be Group 2 member.
Usually, set the Uplink port or the Port is connected to Core switch or router to be the
Un-protected port .
70