2 rack mounting – PLANET VC-2400MR48 User Manual
Page 25
User’s Manual of VC-820M / VC-2400MR Series
2.2.2 Rack Mounting
To install the Managed Switch in a 19-inch standard rack, please follows the instructions described below.
Step1:
Place the Managed Switch on a hard flat surface, with the front panel positioned towards the front side.
Step2:
Attach the rack-mount bracket to each side of the Managed Switch with supplied screws attached to the package.
Figure 2-2-2
and
Figure 2-2-3
shows how to attach brackets to one side of the Managed Switch.
Figure 2-2-1
Attach brackets to VC-2400MR series
Figure 2-2-2:
Attach brackets to VC-820M
You must use the screws supplied with the mounting brackets. Damage caused to the parts
by using incorrect screws would invalidate the warranty.
Step3:
Secure the brackets tightly.
Step4:
Follow the same steps to attach the second bracket to the opposite side.
Step5:
After the brackets are attached to the Managed Switch, use suitable screws to securely attach the brackets to the
rack, as shown in
Figure 2-2-3
and
Figure 2-2-4
.
25