PLANET WGSW-20160HP - Manual (Page 109)

User’s Manual of WGSW-20160HP/WGSW-24040HP series
109
4.5.2 LACP Configuration
Link Aggregation Control Protocol (LACP) - LACP LAG negotiate Aggregated Port links with other LACP ports located on a
different device. LACP allows switches connected to each other to discover automatically whether any ports are member of the
same LAG.
This Page allows the user to inspect the current LACP port configurations, and possibly change them as well. The LACP port
settings relate to the currently selected stack unit, as reflected by the Page header. The LACP Configuration screen in Figure
4-5-4 appears.
Figure 4-5-4 : LACP Port Configuration Page Screenshot
The Page includes the following fields:
Object Description
•
Port The switch port number.
•
LACP Enabled Controls whether LACP is enabled on this switch port. LACP will form an
aggregation when 2 or more ports are connected to the same partner. LACP can
form max 12 LLAGs per switch and 2G LAGs per stack.